Huawei HCIE Datacom Labs
-
Lab 1 – Advanced IGP FeaturesLab 1 – Intro – Advanced IGP Features2m 32sLab 1 – Task 1 – Configure OSPF10m 52sLab 1 – Task 2 – Configure IS-IS Routing6m 42sLab 1 – Task 3 – Adjust OSPF Cost6m 10sLab 1 – Task 4 – Enable OSPF IP FRR4m 36sLab 1 – Task 5 – Enable BFD for OSPF9m 3sLab 1 – Task 6 – Create Same Lo2 on PE1 and P22m 7sLab 1 – Task 7 – OSPF Route Limitation7m 20sLab 1 – Task 8 – Create Lo3 on PE33m 42sLab 1 – Task 9 – Configure Inter Area Route Filter3m 58sLab 1 – Task 10 – Advertise a default route in IS IS3m
-
Lab 2 – Advanced BGP FeaturesLab 2 – Intro – Advanced BGP Features2m 26sLab 2 – Task 1 – Configure BGP between the Backbone and Enterprise Networks18m 23sLab 2 – Task 2 – Securing BGP11m 10sLab 2 – Task 3 – Configure iBGP in the backbone Network5m 30sLab 2 – Task 4 – Assign BGP Community to Loopback 126m 12sLab 2 – Task 5 – Control BGP Routing between branches12m 58sLab 2 – Task 6 – Configure BGP ORF7m 17s
-
Lab 3 – MPLS VPNLab 3 – Intro – MPLS VPN1m 55sLab 3 – Task 1 – Configure MPLS and MPLS LDP in the backbone network11m 10sLab 3 – Task 2 – Configure MP-BGP on the backbone network10m 9sLab 3 – Task 3 – Configure PE CE Routing for HQ19m 18sLab 3 – Task 4 – Configure PE CE Routing for the branches18m 29sLab 3 – Task 5 – Verify routes and check connectivity between branches33m 4s
-
Lab 4 – EVPNLab 4 – Intro – EVPN2m 11sLab 4 – Task 1 – Configure a BD EVPN instance on PEs4m 40sLab 4 – Task 2 – Configure Ethernet Segment3m 13sLab 4 – Task 3 – Establish BGP EVPN Peer Relationship5m 51sLab 4 – Task 4 – Configure CEs to access EVPN L2VPN10m 7sLab 4 – Task 5 – Configure EVPN L3VPNv44m 17sLab 4 – Task 6 – Configure PE CE Routing for HQ8m 59sLab 4 – Task 7 – Configure PE CE Routing for the branches9m 22sLab 4 – Task 8 – Verify routes and check connectivity between branches11m 55s
-
Lab 5 – IPv6 RoutingLab 5 – Intro – IPv6 Routing3mNotes for IPv6 Addressing13m 26sLab 5 – Task 1 – Configure IPv6 addresses on devices12m 10sIPv6 Routing part128m 51sLab 5 – Task 2 – Deploy OSPFv36m 34sLab 5 – Task 3 – Deploy IS-IS for IPv66m 25sLab 5 – Task 4 – Configure Bi-directional Route Import between ISIS and OSPFv35m 30sLab 5 – Task 5 – Configure MP-BGP for IPv623m 58s
Passing the HCIE-Datacom certification will indicate that you have a solid theoretical knowledge of multi-scenario convergence solutions for enterprise networks, and be able to use Huawei Datacom products and solutions to plan, deploy, maintain, and optimize enterprise campus networks, WAN interconnection, and bearer WAN. You will be competent for the expert positions of full-scenario enterprise networks (including account managers, project managers, pre-sales experts, post-sales experts, network architects, etc.).
What's included
- 6 hours and 30 mins
- Hands-on Labs
- Downloadable resources
- Quizzes
- Q&A
- Permanent access
Mohammad Hamdy
Network Architect and Instructor
4.0Instructor Rating38
Students9
Courses1
ReviewsMohammad Hamdy El-Sayed is a Cisco Certified Internetwork Expert (CCIE) - Service Provider No. 47744, has more than 18 years of experience in IP Telecom and Enterprise in worldwide markets with a variety of different roles as Network implementation, services migration, Network Expansion, Network Design, Network coaching and supervision.
Has been assigned to different IP Mobile Core and Backhaul projects worldwide (in Latin America, Europe, Middle East, North Africa, and Asia).
Has Technical Expertise and working experience on Cisco and Huawei IP Products and Huawei Certified Planning Expert - IP No. 1251.
Mohammad Hamdy El-Sayed is a Cisco Academy Instructor since 2005, and is a Cisco Certified Systems Instructor since 2007 providing Cisco CCNA and CCNP courses.